Between April 16th, 2010 and January 13th, 2011, these data-download visits took place on:
- May 19th, 2010
- June 24th, 2010
- August 6th, 2010
- September 10th, 2010
- November 9th, 2010
This Study in the Port Everglades Shipping Channel in Florida is a collaboration between several partners, to investigate the potential pollutant loading characteristics of the Port Everglades Inlet into the Southeast Florida coastal ocean, including an ecologically and economically important section of the Florida Reef Tract. Additional information about the FACE Port Everglades Study can be found here: http://www.aoml.noaa.gov/themes/CoastalRegional/projects/FACE/PtEverg.htm
Port Everglades transmissions went offline on August 4th and have not resumed. Probably a transmitter/GPS problem, but I'm working with the data downloads now and I'll send an update if/when I learn more.And then I followed up with a more detailed report:
I've poked into the data a bit more, so here's a fuller picture of what's going on with the Port Everglades station.Jack visited the station on September 10th, 2010, and then reported:
First of all, it's offline. Its last transmission was at (local) noon on Wednesday, August 4th. We know it's a transmitter-only problem because Jack (by chance) visited the station on Friday, August 6th and collected the latest memory card, so we can look at two more days' worth of data since the failure.
And it's worth saying that, as far as I know, FACE doesn't need satellite transmissions for its work. I believe Jack uses the 6-minute granular CT data that I extract from the memory cards, not the near-real time transmissions. Of course it's good to have the near-real time stuff so we know immediately if the equipment fails, but it's not (as far as I know) a must-have for FACE.
On the ICON side, we prefer to have the satellite transmissions working, because that's kinda what we do. We track our uptime statistics and we feed our numbers to NDBC, so we're generally happier if the transmitter is working.
Anyhow, PVGF1 uses one of our old SAT-HDR-GOES transmitters, and it's been in steady decline since the end of April. It seems like it's a problem with the GPS subsystem. The old SAT-HDR-GOES can't transmit unless it gets a GPS fix before every transmission (by contrast the new TX312 will continue to transmit for one month even if all of the GPS satellites were to simultaneously fall into the ocean). In April we started seeing GPS timeouts when it reached started to go 5 minutes without a fix (normally it takes less than a minute).
By the end of May, these timeouts were happening regularly, about once a day. The odd thing is that a regular pattern developed where transmissions would fail for three or four hours every day beginning at about 1 PM local. If I had to guess, I might say that the problem is exacerbated by higher temperatures in the box?
On August 4th the error codes switched from a GPS error to a failsafe error. This means that the transmitter has probably kicked into failsafe mode again. I think Jack knows how to reset the failsafe on the transmitter, and he should try doing this the next time he visits.
But the big picture is that the transmitter itself is probably failing. One of the old SAT-HDR-GOES that we had at Molasses Reef failed in much the same way. We have four of these guys in all -- one running at Molasses, one failing at Port Everglades, and the other two in my office but I haven't been able to make either of them work, I think they are both dead.
So our options are:
- reset the failsafe on the transmitter and hope it works a while longer
- allow the transmitter to fail and just get data by memory card
- replace the transmitter with a TX312
- something more exotic, maybe use the cellular modem once it's freed up
I did the transmitter reset today 9/10/10 at about 13:00 EDT. Hope it works.And indeed Jack's action was successful, as I confirmed by email later that same day:
It's transmitting, at least for now. It's got two full transmissions so far. I'll cross my fingers and hope it lasts a while!
I've been updating my data spreadsheets and I noticed that the Port Everglades station has been dropping more satellite transmissions lately. The problem is intermittent and from the diagnostics it is related to GPS acquisition timeouts. So either the GPS subsystem is failing in the old SAT-HDR-GOES (bad) or there's a problem with the GPS antenna itself (not as bad).
The problem seems to have begun at the end of April (on April 27th, more or less). This doesn't coincide with any of Jack's visits and it doesn't follow very closely on the April 16th work, so it doesn't seem like it's a result of moving things around in the box.
We dropped 6 records in March (which is normal), 11 records in April, and 23 records so far in May. So the problem might be getting worse but it's still not serious. And you could argue that the near-real-time transmissions are of secondary importance for this site since Jack (I think) depends more heavily on the 6-minute datasets that we retrieve from the memory cards.
Anyhow, something to keep an eye on. Keep in mind that we don't have any more working SAT-HDR-GOES units. We do have some GPS antennae but I can't be sure if they're functional without a SAT-HDR-GOES to test on.
| A view of the PVGF1 CT, sticking up at center with cable emerging from below. |
The PVGF1 Port Everglades station stopped transmitting this past weekend. Its last transmission was sent at approximately 6:24pm local time on Saturday, October 31st.Jack responded on November 5th, 2009 with the following update:
I know you [Jack Stamates] were planning to visit the station after the cruise is over. You might want to involve myself or Mike Shoemaker in the trip, or possibly, one of us Mikes might want to visit the station earlier than that, if we have the ability to open the box and permission to visit the Naval Base.
I'll look to see if there are any suspicious signs in the final transmissions but it looks like it's a clean break (i.e., no gradual power loss, no partial transmissions). This may be a repeat of what happened last July. Shoe fixed things that time, I think he may have just opened up the box and power-cycled the system.
I pulled the power plug on the Campbell and the Sat transmiter, left the power off for a 30 sec then re inserted the plug... Apparently this did not fix the problem.Jack was able to visit the station again on November 16th, and on November 17th, 2009 I sent out the following update:
Jack visited the Port Everglades station again yesterday, and power-cycled the logger and transmitter. He also swapped out the memory cards and brought me the retrieved card. This didn't have any effect on transmissions (i.e., we are still offline, and have been since October 31st). But I now have a memory card to answer some questions about the equipment.Jack returned to Port Everglades and this time did a failsafe-reset on the satellite transmitter, which restarted the satellite transmissions. I sent out the following update on November 19th, 2009:
First off, the datalogger seems to be perfectly ok. It has been logging data nonstop since October 31st, right up until the card's retrieval yesterday.
Secondly, the transmitter is on, it is communicating with the logger, and it is continuing to acquire GPS fixes normally. However, the error codes indicate that its failsafe mode has been tripped. Basically it must have sensed conditions (voltage spike? temperature extreme?) that could have led to permanent damage, and it shut down its transmission systems. Power-cycling will NOT reset the failsafe. Instead, the "reset" button must be held down for at least 4 seconds, which will trigger a 60-second reset procedure. It is entirely possible that this is all that is needed to get the station transmitting again.
Other considerations: I currently have one other SAT-HDR-GOES transmitter, which I am testing on the roof. It is not yet working. I am also testing an updated pvgf1 logger program on the roof (among other things, this would add one of our old GE/Druck barometers, so I could sanity-check the air pressures returned by the WXT). The new logger program (unlike the spare transmitter) IS working.
The bottom line is that our next logical step should probably be to do the transmitter-reset procedure on Jack's next visit. I'd also like to visit the station to upgrade the programming and equipment, but I'm not ready yet.
Jack did a reset of the sat-hdr-goes transmitter at Port Everglades (pvgf1), and that seems to have done the trick. We've received our first transmission from that station, with hopefully many more to come. Good work, Jack!